Testing Instruments

Product Details:

SurGen 16(1500) 

• For fault location in LT to HT 11 kV cables.
• Inbuilt DC high voltage testing up to 16 kV.
• Inbuilt burn down facility (Burning) suitable for high resistance faults.
• Output current more than 350 mA.
• Thumping (Surge) up to 16 kV with 1500 Joules energy on 4, 8 & 16 kV ranges for pinpointing the fault. 
• Inbuilt ICM & Decay coupler to connect with Reflectometer for finding distance to the fault. 
• High voltage metering and mA metering on output.
• High safety features.

Inbuilt Pressure Testing (Hi-pot Test)
Perform DC high voltage testing up to 16 kV to find out which phase is faulty and determine its breakdown voltage and the leakage current.
Inbuilt Burn down facility
In case of high resistive faults, burning is required. Burning will reduce the breakdown voltage of the fault and it will be easy to pre-locate and pinpoint. Hence, burning facility of more than 350 mA is provided.

Digipoint

• Magnetic and Acoustic signal strength through bar graph and digits on LCD. 
• Coincidence figure (Time delay method) indicates the relative distance to the fault in milliseconds (ms) on LCD.
• LCD screen with backlight feature for night.
• Background noise reduction and noise immunity.
• Built to withstand rugged field conditions with high grade acoustic and magnetic sensors.
• Automatic mute feature to activate while in motion (during pick up of receiver).
• Easy, fast and accurate pinpointing

Coincidence Figure
Pinpointing the exact location of faults in cables which are laid inside pipe is very difficult because the air inside the pipe will lead to echo of sound which is generated at the fault point, leading to sound/acoustic signal of strength similar to the fault point at different parts of the cable, hence to pinpoint the exact location of fault in these conditions we use the coincidence feature of the Digipoint, which gives the distance to the fault in milliseconds with respect to your position.

Reflectometer T-610

• Pulse Echo (TDR), Impulse current (ICM) & Decay method provided to get the distance to almost all types of faults.
• 10” Colour LCD display with user friendly interface for easy operation.
• Adjustable setting for distance range pulse width, time delay and zoom function.
• Portable, Microprocessor control, Menu driven, Pulse reflection type, suitable for use in the field.
• Comparison feature of any 5 graphs for review and analysis to get more accurate results.
• Velocity of propagation (VOP) control makes it easy to precisely pre-locate faults in cables with different velocity.
• Automatic storage of more than 100,000 fault graphs.

Additional Information:

• Production Capacity: 4 Set per month
• Delivery Time: 4 to 6 Weeks
• Packaging Details: Wooden Box Packing

Product Details:

SurGen 16(1500) 

• For fault location in LT to HT 11 kV cables.
• Inbuilt DC high voltage testing up to 16 kV.
• Inbuilt burn down facility (Burning) suitable for high resistance faults.
• Output current more than 350 mA.
• Thumping (Surge) up to 16 kV with 1500 Joules energy on 4, 8 & 16 kV ranges for pinpointing the fault. 
• Inbuilt ICM & Decay coupler to connect with Reflectometer for finding distance to the fault. 
• High voltage metering and mA metering on output.
• High safety features.

Inbuilt Pressure Testing (Hi-pot Test)
Perform DC high voltage testing up to 16 kV to find out which phase is faulty and determine its breakdown voltage and the leakage current.
Inbuilt Burn down facility
In case of high resistive faults, burning is required. Burning will reduce the breakdown voltage of the fault and it will be easy to pre-locate and pinpoint. Hence, burning facility of more than 350 mA is provided.

Digipoint

• Magnetic and Acoustic signal strength through bar graph and digits on LCD. 
• Coincidence figure (Time delay method) indicates the relative distance to the fault in milliseconds (ms) on LCD.
• LCD screen with backlight feature for night.
• Background noise reduction and noise immunity.
• Built to withstand rugged field conditions with high grade acoustic and magnetic sensors.
• Automatic mute feature to activate while in motion (during pick up of receiver).
• Easy, fast and accurate pinpointing

Coincidence Figure
Pinpointing the exact location of faults in cables which are laid inside pipe is very difficult because the air inside the pipe will lead to echo of sound which is generated at the fault point, leading to sound/acoustic signal of strength similar to the fault point at different parts of the cable, hence to pinpoint the exact location of fault in these conditions we use the coincidence feature of the Digipoint, which gives the distance to the fault in milliseconds with respect to your position.

Reflectometer T-610

• Pulse Echo (TDR), Impulse current (ICM) & Decay method provided to get the distance to almost all types of faults.
• 10” Colour LCD display with user friendly interface for easy operation.
• Adjustable setting for distance range pulse width, time delay and zoom function.
• Portable, Microprocessor control, Menu driven, Pulse reflection type, suitable for use in the field.
• Comparison feature of any 5 graphs for review and analysis to get more accurate results.
• Velocity of propagation (VOP) control makes it easy to precisely pre-locate faults in cables with different velocity.
• Automatic storage of more than 100,000 fault graphs.

Additional Information:

• Production Capacity: 4 Set per month
• Delivery Time: Within 4 to 6 Weeks
• Packaging Details: Wooden Box Packing