Techno Instrumentation (India) Pvt. Ltd.

SurGen 32(1500):-

• For fault location in LT to HT 11 kV & 33 kV cables.
• Inbuilt DC high voltage testing up to 32 kV.
• Inbuilt burn down facility (Burning) suitable for high resistance faults.
• Output current at least 280 mA.
• Thumping (Surge) up to 32 kV with 1500 Joules energy on 8, 16 & 32 kV ranges for pinpointing the fault.
• Inbuilt ICM & Decay coupler to connect with Reflectometer for finding distance to the fault.

Technical Data:-
Output Voltage - Output Current (Burning)
0 – 8 kV - At least 280 mA
0 – 16 kV - At least 130 mA
0 – 32 kV - At least 55 mA

Output Energy - 1500 Joules Energy on each range
Supply Voltage - 230 V AC +/- 10%, 50/60Hz
Surge Timing -      5 to 15 sec.
Operating Tem. - 0 to 55 Deg. Celsius

Protection Features:-

• Zero start interlock
• Range interlock
• ON/OFF key switch
• Automatic discharge
• Auto OFF in case of power supply break
• High Voltage ON lamp
• Over load protection through MCB
• Emergency stop button

Accessories:-

• 25-meter-high voltage output cable.
• 10 meter mains supply cable.
• 25 meter earthing cable.
• 1 Nos Discharge rod.
• 5 meter discharge rod lead.

Reflectometer T-610

• Pulse Echo (TDR), Impulse current (ICM) & Decay method provided to get the distance to almost all types of faults.
• 10” Colour LCD display with user friendly interface for easy operation.
• Wi-Fi for internet connection, Enabling Online support of experts to review and help in difficult fault conditions.
• Adjustable setting for distance range pulse width, time delay and zoom function.
• Portable, Microprocessor control, Menu driven, Pulse reflection type, suitable for use in the field.
• Comparison feature of any 5 graphs for review and analysis to get more accurate results.
• Velocity of propagation (VOP) control makes it easy to precisely pre-locate faults in cables with different velocity. 
• Automatic storage of more than 100,000 fault graphs.

Technical Data:-
Power Supply - Rechargeable battery with 230V AC + 10%, 50Hz, Charger.
Pulse Amplitude - 20V & 90V 
Pulse Width - 20 nanosecond to 5 microsecond in Pulse Echo Mode
Range - Up to 160 km
Band Width - 200 MHz
VOP Range (Half) - 50 m / microsecond to 150 m / microsecond
Interface - USB
Operating
temperature - -10 to 55 Deg. C
Weight - 6 Kg (Approx.)
Storage - More than 100,000 graphs in FLT (fault file) in Month: Date: Time format
Digipoint:-

• Magnetic and Acoustic signal strength through bar graph and digits on LCD.
  Coincidence figure (Time delay method) indicates the relative distance to the fault in milliseconds (ms) on LCD.
• LCD screen with backlight feature for night.
• Background noise reduction and noise immunity.
• Built to withstand rugged field conditions with high grade acoustic and magnetic sensors.
• Automatic mute feature to activate while in motion (during pick up of receiver).
• Easy, fast and accurate pinpointing.

Technical Data:-
Power Supply - 12 V DC (AA battery x 8).
Gain - > 100db (Acoustic)
> 100db (Magnetic)
Frequency - 100 Hz to 1.5 Khz (Acoustic)
470 Hz to 10 Khz (Magnetic)
Coincidence
figure range - 0 to 99 milliseconds (mS)
Operation time - 50 hours. (approximate)
Weight - 900 gm (approx.)

SurGen 16(R2000):-

• For fault location in LT to HT 11 kV cables.
• Inbuilt DC high voltage testing up to 16 kV.
• Inbuilt burn down facility (Burning) suitable for high resistance faults.
• Output current at least 575 mA.
• Thumping (Surge) up to 16 kV with 2000 Joules energy on 4, 8 & 16 kV ranges for pinpointing the fault.
• Inbuilt ARC Reflection filter, ICM & Decay coupler to connect with Reflectometer for finding distance to the fault.
• High voltage metering and mA metering on output.
• High safety features.

Digipoint:-

• Magnetic and Acoustic signal strength through bar graph and digits on LCD.
• Coincidence figure (Time delay method) indicates the relative distance to the fault in milliseconds (ms) on LCD.
• LCD screen with backlight feature for night.
• Background noise reduction and noise immunity.
• Built to withstand rugged field conditions with high grade acoustic and magnetic sensors.
• Automatic mute feature to activate while in motion (during pick up of receiver)
• Easy, fast and accurate pinpointing.

Reflectometer T-610:-

• Pulse Echo (TDR), Impulse current (ICM) & Decay method provided to get the distance to almost all types of faults.
  10” Colour LCD display with user friendly interface for easy operation.
  Wi-Fi for internet connection, Enabling Online support of experts to review and help in difficult fault conditions.
  Adjustable setting for distance range pulse width, time delay and zoom function.
  Portable, Microprocessor control, Menu driven, Pulse reflection type, suitable for use in the field.
  Comparison feature of any 5 graphs for review and analysis to get more accurate results.
  Velocity of propagation (VOP) control makes it easy to precisely pre-locate faults in cables with different velocity.
  Automatic storage of more than 100,000 fault graphs.
  
  
  
  
  
  
  
  
• 10” Colour LCD display with user friendly interface for easy operation.
• Wi-Fi for internet connection, Enabling Online support of experts to review and help in difficult fault conditions.
• Adjustable setting for distance range pulse width, time delay and zoom function.
• Portable, Microprocessor control, Menu driven, Pulse reflection type, suitable for use in the field.
• Comparison feature of any 5 graphs for review and analysis to get more accurate results.
• Velocity of propagation (VOP) control makes it easy to precisely pre-locate faults in cables with different velocity.
• Automatic storage of more than 100,000 fault graphs.